Informatika és tudomány

  • mcmoha
    #99058
    Itt van megegyszer.:)

    10.3.6 In order to help prevent a wheel becoming separated in the event of all suspension members connecting it
    to the car failing provision must be made to accommodate flexible cables, each with a cross sectional area
    greater than 110mm², the purpose of which is to connect each wheel/upright assembly to the main
    structure of the car.     The cables and their attachments must also be designed in order to help prevent a
    wheel making contact with the driver's head during an accident.
    Each cable must have its own separate attachment which :
    - is able to withstand a tensile force of 70kN ;
    - is able to accommodate a cable end fitting with a minimum inside diameter of 15mm.
    Each wheel may be fitted with one or two cables, dependent upon their performance when tested under
    FIA Test Procedure 03/07. If one cable is fitted it must exceed the requirements of 3.1.1 of Test Procedure
    03/07 and if two are fitted each must exceed the requirements of 3.1.2.
    "Cognovi naturam rerum. Lord's countdown made the world. Truly your's Donda"