Informatika és tudomány

12
segitsééééééééééég!!
  • Ladisz
    #12
    nagyon köszönöm
    probálgatom akkor
  • Ladisz
    #9
    1.Introduction 2
    1.1 Product Specification 2
    1.2 Package Contents 3
    1.3 Hardware Layout 3
    2.ADVICE BEFORE INSTALLATION 4
    2.1 Hardware Portion: 4
    2.2 Software Portion: 4
    3.START TO INSTALL 4
    3.1 Hardware Installation 4
    3.2 Driver Installation 4
    3.3 Installation of DVD MAKER Application 7
    4.Start to Use the DVD MAKER Application 9
    4.1 Running the DVD MAKER for the first time 9
    4.2 Screen Panel Function Introduction 10
    4.3 Control Panel Function Introduction 11
    4.3.1 Encode Setting 11
    4.3.2 Show Pop Up Menu 15
    4.4 DMA setting 18
    4.5 Schedule Record Wizard 20
    4.6 TV Mode Configuration 23
    5.Hot Key Function 23
    6.Q & A 24



    1.Introduction

    1.1 Product Specification

    Product Number DVD MAKER (Capture Version) DVD MAKER (TV Version)
    Encoder Chipset Stream Machine SM2210 Stream Machine SM2210
    TV channel
    TV system • 125 Channels
    • NTSC System
    • PAL / SECAM System
    Video Encoder




    Video Decoder • Real time MPEG-1/MPEG-2
    Video Encoding
    • Support Constant Bit Rate(CBR)
    • Support Variable Bit Rate(VBR)

    • Decode ML @ MP MPEG-1/MPEG-2 • Real time MPEG-1/MPEG-2
    Video Encoding
    • Support Constant Bit Rate(CBR)
    • Support Variable Bit Rate(VBR)

    • Decode ML @ MP MPEG-1/MPEG-2
    Video Resolution
    NTSC System

    PAL System
    (PAL/SECAM)
    • 704*480, 480*480, 352*480
    352*240

    • 704*576, 480*576, 352*576
    352*288
    • 704*480, 480*480, 352*480
    352*240

    • 704*576, 480*576, 352*576
    352*288
    Video Bit Rate • 10Mbps/sec or above (VariableBit Rate)
    • 15Mbps/sec or above (IPBframes & Constant Bit Rate) • 10Mbps/sec or above (VariableBit Rate)
    • 15Mbps/sec or above (IPBframes & Constant Bit Rate)
    Video Source
    (Input / Output) • One AV(CVBS) Input
    • One S-Video(Y/C) Input
    • One S-Video(Y/C) output /
    • AV(CVBS) output • One AV(CVBS) Input
    • One S-Video(Y/C) Input
    • One S-Video(Y/C) output /
    • AV(CVBS) output
    Software • Driver for Windows 98/2000/ME/XP
    • DVD MAKER Capture Version • Driver for Windows 98/2000/ME/XP
    • DVD MAKER TV Version
    System
    Requirement • CPU Pentium III 500 MHZ or up
    • Compatible PCI V2.1 Slot
    • 128MB DRAM
    • Windows 98/2K/ME/XP OS
    • 7200RPM or above Hard Disk • CPU Pentium III 500 MHZ or up
    • Compatible PCI V2.1 Slot
    • 128MB DRAM
    • Windows 98/2K/ME/XP OS
    • 7200RPM or above Hard Disk


    1.2 Package Contents
    DVD MAKER package includes:

     DVD MAKER PCI Card
     CD Driver
     User’s Manual
     Audio Cable
     S-Video(Y/C) / AV(CVBS) Cable (For DVD MAKER TV Version Only)
     IR Sensor & Remote Control (Optional)

    1.3 Hardware Layout


    DVD MAKER(Capture Version)


    DVD MAKER(TV Version)
    2.ADVICE BEFORE INSTALLATION
    2.1 Hardware Portion:
    As DVD MAKER is a PCI Multi-function card, please be sure to confirm there are available PCI slots in the system for DVD MAKER insert.

    2.2 Software Portion:
    To Windows™ 98/ME/2K Users
    Please make sure if Microsoft™ DirectX 8.0 is installed if you are using Windows™ 98/ME/2K operation system.
    To Windows™ NT Users
    If you are Windows™ NT users, sorry DVD MAKER is not supporting Windows™ NT operation system yet.

    3.START TO INSTALL
    3.1 Hardware Installation

    ŒPlease power off your PC.
    Please open the casing.
    ŽFind out the available PCI slot on the mainboard.
    Please insert DVD MAKER onto the PCI slot perfectly and screw tightly.
    Put back the casing with screws fastened.
    ‘Power on the PC and start the software installation procedure.

    3.2 Driver Installation

    ŒPlease insert the CD driver onto the CD-ROM Drive. (Assuming CD_ROM driver E)
    New hardware system will be detected after entering Windows system. The system will require to install the DVD MAKER driver.
    ※ The Path of the TV Version Driver is E: \DVD MAKER\TVVersion \Drv .
    ※ The Path of the Capture Version is E: \DVD MAKER\ CaptureVersion\Drv

    ŽThe system will automatically detect the driver and install into the system.
     After installing the driver successfully, a new driver can be found on system.




    ★ Important Note
    Sometimes the WinXP can’t fine the right path of the DVD MAKER Driver.
    Please follow the next step to install the Drive.

    Step1: When you put the DVD MAKER PCI Card into a PCI Slot and restart the computer, WinXP will start to run the New Hardware Wizard. Please select the “Install from a list or specific location(Advanced)” and click “Next”.



    Step2:Please select “Include this location in the search”. Then select the path of the driver. The Path of the TV Version Driver is E: \DVD MAKER\TVVersion \Drv .
    The Path of the Capture Version is E: \DVD MAKER\ CaptureVersion\Drv



    Step3: The Windows will find the DVD MAKER Driver, Please click the “Continue Anyway ” to the next step.



    Step4: The WinXP will find file location e: \DVD MAKER\TVVersion\
    drv\i386 .


    Step5: Please change the path to the e: \DVD MAKER\TVVersion
    \drv\Cap7146.sys .

    Step6: Then the Hardware Update Wizard will continue to install the driver. When you see the picture below that means your driver install well.. please click the “Finish” to close the Wizard




    3.3 Installation of DVD MAKER Application

    After the drivers are installed, the next step you need to do is to install the DVD MAKER application.

    ŒStart Windows and insert the DVD MAKER CD disk into the CD-ROM drive. The DVD MAKER Autorun Page will appear, please select “DVD MAKER”.
    Select the “DVD MAKET_TV Version“ to start to install the “DVD MAKER (TV Version) Application” or select the “DVD MAKER Capture_Version” to start to install the “DVD MAKER (Capture Version ) Application” .

    ŽChoose the same language as Windows OS and click ‘OK’.









    Please pick up your local TV system after entering the installation program
    as below:



    Please follow the install wizard to install DVD MAKER Application.
    After the application is installed, it will appears the below DMA setting dialogue.

     As DVD MAKER is a high-end encoding card, it requires a faster operating system.
    To get the best performance of DVD MAKER , we suggest you select DMA setting.


























    ‘Click OK button, the ‘System Setting Change’ dialogue shows up.
    Click the ‘Yes’ button to restart the system.














    4.Start to Use the DVD MAKER Application

    4.1 Running the DVD MAKER for the first time
    Please click on ‘Start’ > ‘Programs’ >‘DVD MAKER’ > ‘Control Panel’ to start
    DVD MAKER application.

    Note: Before start DVD MAKER application, all settings of ‘Power management’ have to set to ‘Never’. Please go to Start \ Settings \ Control panels \ Power management \ Power schemes \ System standby \ Turn off monitor \ Turn off hard disks, all select 'Never’.



    4.2 Screen Panel Function Introduction


    DVD MAKER function list can also be founded by clicking right button of mouse on DVD MAKER screen.




    Always Put TV Screen on Top
    Minimize TV Window
    Full Screen Display
    Close All Program


    4.3 Control Panel Function Introduction



    Icon Introduction

    Power
    Record Minimize TV Window
    Stop Record
    Play Volume Down
    Mute Audio Volume Up
    Snapshot Select Video Source
    Encode Setting Show Pop Up menu
    Air/Cable Option
    Add/Delete this channel in the channel List






    Number Key

    4.3.1 Encode Setting
    When clicking ‘Encode Setting’ icon, it shows the below dialogue which includes four parts of settings:
    1. MPEG Parameter
    2. Disk Information
    3. Video
    4. Capture Time Limit/File Path/AV Split


    1. MPEG Parameter
    ŒSimple Mode:
    • Provide standard parameter setting for VCD/DVD/SVCD.
    • Set up Video Format/Frame Rate (support PAL/SECAM 25fps or NTSC 29.97fps)


    Advance Mode:
    • Provide set up Picture Size(NTSC/PAL/SECAM) Custom:
    Select: Full[Mpeg2] mode.
    1/2[Mpeg2] mode.
    2/3[Mpeg2] mode.
    SIF[Mpeg1] mode.
    • Rate Control! CBR (fixed sample rate)
    VBR (Varied sample rate)
    • .Set up Video Format/Frame Rate.
    (Support PAL 25fps or NTSC 29.97fps)
    • Bit Rate: Adjust video bit rate.
    • I/P frames distance 3, number of frames in GOP 12 GOP number must be I/P number in times.
    • Tick HHR Filtering! Enable HHR Filter.
    • User Data! If ticking ‘Disable’, the user’s data embedded in front of captured MPEG file won’t appear.



    2. Disk Information.
    • The saved hard disk can be set up before capturing.
    • When the saved hard disk space is less than 100MB free spaces, the system will stop recording automatically.
    • You can capture the file size up to 4GB.

    3. Video.
    ŒVideo Adjustment:
    Brightness: Default at 128.
    Contrast: Default at 64.
    Saturation: Default at 64.
    Hue: Default at 0.

    Video Standard.
    You can select NTSC or PAL or SECAM video format.
    Or click Auto Detect to select NTSC or PAL/SECAM automatically.
    ŽVideo Source.
    Select ‘Video Tuner In Air/Cable’ video source.
    0: Select ‘Video Tuner In’ video source.
    1: Select ‘Video Composite In’ video source.
    2: Select ‘Video S -Video In’ video source.

    4. Capture Time Limit/File Path/AV Split

    ŒUse Time Limit: Set up the recording time (hr, min, sec).
    Capture/Playback Option (Tick AV Split)
    Save captured audio and video files into MPV file format (video) and MPA file format (audio).
    ŽWorking Path: Tick ‘Use Working Path’ and select the path and file name you
    want to save into.

    4.3.2 Show Pop Up Menu
    When clicking “ “ icon, it shows the below dialogue which includes two parts of settings:


    1. Manual Scanning.
    The Manual Scanning Tool shown below is a useful tool for searching available
    tuned channels when the built-in frequency table is not correct.





    This dialogue is to add the searched frequency into the given channel number.



    2.Channel Editor
    Channel Editor is a tool of editing all channel attributes.



    Rename: If you want to change the channel name, please enter the name you
    want (i.e. DISCOVERY) in below dialogue and click ok to enter.



    Remap: You can re-map the current channel to the different channel number
    by selecting below number you like.



    4.4 DMA setting

    As DVD MAKER is a high-end encoding card, it requires a faster operating system. To get the best performance of DVD MAKER , please make sure you have started the below two functions on the system.

    1. Before starting DVD MAKER application, please follow the instruction below to check your setting.
    Œ Please click ’Start\Control panel\System\Device to Device Manager
    select ‘System Device \Direct memory access controller\setting’.
    ŽTick ‘Reserve DMA buffer’,
     Key in ‘64’ K bytes reserved.







    Click Direct memory access controller.
















    Reserve DMA Buffer
    at 64Kbytes reserved.


    2. Before starting DVD MAKER application, please follow the instruction below to check your setting.
    Œ Please click “Start\Control panel\System\Device” to Device Manager
    Select “Disk drives\GENERIC IDE DISK TYPE 46\ Setting”
    ŽClick on “DMA”.




    4.5 Schedule Record Wizard
    When you click this function, it shows a ‘Schedule Record’ dialogue below:



    When clicking ‘New’ button, it shows a new schedule setting dialogue as below:



    When the above setting is ok, please click ‘Next’ and it shows the below dialogue.
    1. Encode Setting.
    ΠSimple Mode (standard mode)! Provide standard parameter setting for
    VCD/DVD/SVCD.
    • Select picture size VCD, DVD or SVCD standard (NTSC/PAL/SECAM)
    • Set up video format / frame rate (support PAL/SECAM 25fps or NTSC 29.97fps).



    Advance Mode: Adjust Bit Rate according to Requirements.
    • Set up Picture Size(NTSC/PAL/SECAM) Custom:
    Select Full[Mpeg2], 1/2[Mpeg2], 2/3[Mpeg2], SIF[Mpeg1] mode.
    • Rate Control! CBR (fixed sample rate)
    VBR (Varied sample rate)
    • .Set up Video Format/Frame Rate.
    (Support PAL 25fps or NTSC 29.97fps)
    • Bit Rate: Adjust video bit rate.
    • I/P frames distance 3, number of frames in GOP 12
    GOP number must be I/P number in times.
    • Tick HHR Filtering: Enable HHR Filter.
    • User Data: If ticking ‘Disable’, the user’s data embedded in front of captured MPEG file won’t appear.



    When the above setting is ok, you can add another new schedule. The functions of
    buttons of ‘Schedule Record Wizard’ are introduced as below:
    *When clicking ‘start’ button, it starts to record according to the schedule.
    *When clicking ‘Del’ button, it deletes the schedule setting.
    *When clicking ‘Stop’ button, it stops schedule recording.
    *When clicking ‘Hide’ button, it hides the ‘schedule record wizard’ o n task bar.
    *When clicking ‘Info’ button, it shows below dialogue about the schedule record
    information.




    4.6 TV Mode Configuration



    ŒClick on Preview Mode (DIB Draw) to switch to Preview Mode.
    Click on Overlay Mode (Direct Draw) to switch to Overlay Mode.

    4.7 Uninstall
    Before uninstalling DVD MAKER application, please close DVD MAKER control panel first. (Click right button of mouse on DVD MAKER icon on the task bar and select ‘Unload panel’) And go to ‘start \program\DVD MAKER \Uninstall’ to uninstall application.

    5.Hot Key Function

    1.→Right: Volume up
    2.←Lift: Volume down
    3. 0~9: Channel Number
    4. UP: Channel Up
    5. Down: Channel Down
    6. S: Call Setting Dialogue
    7. C: Still Capture
    8. B: Auto Scanning
    9. L: Recall Previous Channel
    10. I: Change Video Source
    11. R: Record
    12. M: Mute
    13. Enter: Full Screen
    14. E: Close Application




    6.Q & A
    1. Q: The screen would be vibrating while recording program through DVD MAKER.
    A:1.Please turn on the DMA mode from HDD. (Please check P.17 )
    2.Please turn on the DMA mode from system.(Please check P.15)
    3.Please update to VIA 4 in 1 service pack for VIA chipset main board.
    4.Please Intel Inf_Utility for Intel810 and 815 series motherboard
    5.Please update Microsoft DirectX 8.0 Driver.

    2. Q: Why does the video stop when the video window size is adjusted?
    A: As DVD MAKER application is based on DirectX 8.0, please install Microsoft™ DirectX 8.0 to solve this problem.

    3. Q: Why does the system crash and cause the DVD MAKER application errors when
    start access saving power scheme?
    A: Before start DVD MAKER application , all settings of ‘Power management’ have to be ‘Never’. Please go to Start \ Settings \ Control panels \ Power
    management \ Power schemes \ System standby \ Turn off monitor \ Turn off
    hard disks, all select “Never”.
    4. Q: Why can’t I open “DMA” setting from ‘My computer’ \ Control \System
    \Device management \Hard disk \ Generic IDE Disk Type?
    A: When some IDE Disk Types of Hard disk or CD ROM connecting devices are accessing DMA function, it cause the system can’t open DMA mode. Please remove all IDE connections of Hard disk or CD ROM from the computer.

    5. Q: No sound release while record playing back?
    A:1.Please be sure the Line-out has been connected with Line-in of the sound card.
    2.Please check if the Line-in of the Record Property of volume control has been enable.
    3.If it is unable record the sound, please use the MIC-in of the sound card.
    And enable it in the Record property of volume control

    6. Q: The voice burst out while recording play back.
    A: 1.Please install DirectX 8.0
    2.Please update sound card driver.

    7. Q: The application is in blue picture while opening.
    A:1.Please be sure that the driver of VGA card is correct or please update the driver of VGA card to the latest version.
    2.Please update DirectX Driver.

    8. Q: The reference step of upgrading picture quality.
    A:1.Please update Microsoft DirectX Driver.
    2.Please update the VGA Card Driver.
    3.Please update the Driver of your main board. (ex: VIA chipset, or Intel chipset driver and utilities.)

    9. Q: The TV picture is in black while recording.
    A:1.Please be sure the VGA card supporting Overlay or update the driver of VGA card.
    2.Please update DirectX 8.0 Driver.

    10.Q: The DVD MAKER PCI Card could not be installed correctly and the message "unknown device" would come out in the Windows.
    A: Please check if the DVD MAKER PCI Card is put in the PCI slot correctly or try another one PCI slot.

    11.Q: What operation system would be supported by DVD MAKER ?
    A: MS WINDOWS 98/SE/ME/2000/XP

    12. Q: The file size limitation of single file.
    A:1.Windows FAT16: 2GB
    2.Windows FAT32: 4GB
    3.Windows NTFS: No limitation

    13. Q: Why I install the driver in WinXP, the os always ask me to insert the file location?
    A: Sometimes the WinXP can’t fine the right path of the DVD MAKER Driver.
    Please insert the right file path or you can check the Page 5 to install the driver.
  • Ladisz
    #6
    ha berakom ide a leírását amit kaptam hozzá átfutnád? hátha többet tudsz meg belőle.
  • Ladisz
    #3
    itt vagyok
  • Ladisz
    #1
    WAYJET DVD MAKER + TV Tuner

    Hardveres Mpeg1,Mpeg2 tömörítõ


    Újdonság !!!

    48000.-Ft+Áfa

    VideoCD,SuperVideoCD,DVD készítés kiváló minõségben TV-rõl vagy bármilyen külsõ analóg videó jelforrásról.
    Hardveres Realtime MPEG 1,MPEG 2 digitalizáló kártya/PCI
    TV Tuner/ 125 csatornás PAL/Secam/NTSC
    Philips,StreamMachine Chipset
    AV és S-Video bemenet-kimenet
    Sztereo hang bemenet-kimenet
    TV kimenet
    TV és Videofelvételek felbontása: VCD,SVCD,DVD
    PAL 352x288,352x576,480x576,704x576
    NTSC 352x240,352x480,480x480,704x480
    Video bitrate Max. 10Mb
    Távirányító
    DVD MAKER MPEG szoftver
    ULEAD Video Studio
    ULEAD Photo Explorer
    ULEAD Photo Express
    Driverek:Win98/2000/ME/XP

    nos a gondom az hogy win98-ra fel sem tudom rakni. xp-n megy csak a hangja nem jon be. és mi az a tv out hiába kötöm a tévére semmi nem megy rajta. a tömörítés jó és szép képet ad vissza csak hát a hang :(((
    Ha tudna valaki segíteni vagy valami részletes leírást róla a neten megköszönném.